Terminal crimping machine: basic introduction of terminal line The terminal line can arbitrarily select the number of wires and the spacing, which makes the connection more convenient, greatly reduces the volume of electronic products, reduces production costs, and improves production efficiency. It is most suitable for moving parts and motherboards, between PCB boards and PCB boards, and small Used as a data transmission cable in chemical equipment. Common specifications include various pitch flexible cables such as 0.5mm, 0.8mm, 1.0mm, 1.25mm, 1.27mm, 1.5mm, 2.0mm, and 2.54mm. Terminal lines are widely used in the connection between various printer print heads and motherboards, signal transmission and board connection of plotters, scanners, copiers, stereos, LCD appliances, fax machines, and various DVD players. In modern electrical equipment, it is almost everywhere. Common types of terminal wires are as follows: Type A: the two ends are connected and the reinforcing plate is attached to the insulating adhesive tape; Type B: The reinforcing plate is directly pasted on the insulating adhesive tape; Type C: The reinforcing plates at both ends are directly pasted on the conductor; D type: the reinforcing plates at both ends are directly pasted on the conductor; E type: one end reinforcing plate is attached to the insulating adhesive paper, and the other end is directly soldered; F type: the reinforcing plates at both ends are directly attached to the insulating adhesive paper, and the inner half is peeled off; Type G: Direct soldering at both ends.
Chinese
