Whether the material of the crimping tool of Huasheng Tool is subjected to the inspection Huasheng Tools, for such problems, must learn to prescribe the right medicine. So choose a suitable crimping tool, then all the problems can be solved. Crimping pliers also have good and bad points, and the way to distinguish between good and bad, it depends on whether the material of the crimping pliers has withstood the test. The crimping tool can not only strip the wire, but also cut the wire and press the wire. The realization of these three functions depends on the port of the crimping pliers. It is necessary to know the force-receiving area required for stripping, tangential and crimping. Taking the tangent line, if the area of the force of the slice and the cut line is too large, it will result in the situation that the effective pressure cannot be formed in the unit area of the blade, which makes it impossible to cut by human power alone. If the area of the stressed force is too small, the destructive pressure line will be caused by uneven force. P = F / S, F is the pressure, and S is the pressure area. It can be seen from the formula that if the actual force area changes, the pressure will also change. It can be seen from the above that the port of the crimping tool must have a pointed cut and a flat pressure port. To evaluate the quality of the incision, not only the actual area of the force caused by the incision but also the pressure, but also the material of the incision. The quality of the two metal blades used for tanging determines the flatness of the cut port. At the same time, it is necessary to control the distance between the metal blades, too large to peel off the rubber of the twisted pair, and when it is too small, it is easy to cause the wire to be cut due to improper force. The quality of the crimping tool depends on the handle, so don't underestimate the presence of the handle. It is not just to make the crimping pliers more beautiful, but more importantly, to make it more comfortable when you use your own force, and this comfort is only its surface phenomenon. The application of the plastic suit increases the force on the handle. The area, to a certain extent, people can achieve the same cutting effect with less force. The advantage of plastic is also in its cushioning characteristics. When people hold steel bars, when the force is too strong, there will be a deep long print on the surface of the human skin, and the flexibility of the plastic completely guarantees the safety of the human hand. From the head to the end of the crimping tool, we can clearly understand how to choose a good crimping tool. Look at it through two points. One of them is to see if it has enough fine cuts to form point pressure and use less force to achieve the cutting effect. The other point is to see if it has a rough enough pressure to form a large dot pressure. Pressure line. One of them is to see if its handle has a large enough area of force to achieve the desired purpose with the least amount of force. [Huasheng Tools]
Chinese
